GN1159
GN1159 是专为数据通信和电信应用而设计的多速率收发器 IC。此发射式 DFB/FP 激光驱动器采用先进设计,致力于提供卓越的光学性能,同时实现低功耗。可编程均衡功能可用于优化抖动。Tx 输出具有可编程的上升/下降时间,以针对不同的比特率进行优化。GN1159 的亮点是集成式自动功率控制环路,可调节偏置电流以补偿激光老化和环境变化。GN1159 带有一个接收后置放大器和一整套灵活的数字诊断功能,无需外部微处理器。
Contact your local Semtech sales representative for the datasheet and ordering information.功能
- 集成 DFB/FP 驱动器、接收后放大器和数字诊断功能
- 数据传输速率高达 12.5 Gbps
- 高度灵活的数字运算单元
- 全套警报和监控功能
- 无需外部微处理器
- 10Gbps Ethernet and Fibre Channel
- 高达 12.5 Gbps CPRI 的无线前传
应用
封装
- 4 mm x 4 mm QFN 封装
订购代码
- Contact your local Semtech sales representative for ordering information.
Pb(Lead)-Free/RoHS-Green Info
(-40°C 至 +85°C / 4000 循环)
(50°C,4000 小时)
Related Parts
GN1159-INTE3Z
探索丰富的可下载资源和数据表,帮助原型制作和生产。
登录或注册 mySemtech,以获得限定的产品文档,并将文档添加到观察清单以获得更新提醒
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
Part # | 国家/地区 | Qty | Buy | 经销商 |
---|
资源
To see more videos Videos
Semtech’s Tri-Edge™ GN2255 is the industry’s first analog IC solution enabling ultra-low latency, less than 1.5W module power, and performance for up to 10km reach for 50Gbps PAM4 SFP56 optical modules. Based on the proven Tri-Edge CDR platform qualified in data center applications, the new solution delivers the cost effectiveness, small footprint, low power, ultra-low latency, and performance demanded by 5G front haul applications. The new Tri-Edge GN2255 enables 50Gbps PAM4 links that will double the bandwidth of currently deployed 25Gbps NRZ front haul links. Semtech’s introduction of the Tri-Edge 5G wireless IC will help support new 5G applications, including edge computing, enhanced mobile broadband and device streaming, and fixed wireless access (i.e., home Internet). Learn more about the product announcement here.
今年早些时候,评估工程 (EE) 与 Semtech 信号完整性产品事业部高级营销经理 Raza Khan 进行了交谈,讨论了行业趋势和新 Tri-Edge 5G 无线产品。
立即阅读在 2018 年进行了大量演示和 alpha 模块测试之后,双密度版本的四通道小型可插拔 (QFSP) 多源协议 (MSA) 模块标准有望成为新线卡的规则。QSFP-DD 热潮的隐含意义不是模块本身的物理特性,而是转向先进信令方法的趋势。十年前,QSFP28 的问世预示着使用 NRZ 信令的 25Gbps 电通道即将占据主导地位。如今,QSFP-DD 及其更庞大的表亲 —— 八进制 SFP 或 OSFP ,都使用 PAM4 信令。其用得最多的是 50Gbps 通道。但 QSFP-DD 足够灵活,可以在各种实施中使用八通道接口:25G x 8 用于 200Gbit 以太网,50G x 8 用于 400Gbit 以太网,可能还有一些早期的 100G x 8 用于预标准 800Gbit 以太网。
立即阅读