GN1052
The Gennum® GN1052 is a fully integrated silicon germanium BiCMOS transimpedance amplifier, providing wideband, low noise pre-amplification of signal current from a PIN photodiode or APD.
It features differential outputs. A decoupling capacitor on the supply is the only external component required.
功能
- Single +3.3V power supply
- Power dissipation =180 mW (typ)
- Input noise current = 1µA rms
- Transimpedance gain = 4kΩ into a 100Ω load (differential)
- Input current overload = 2.6 mA pk
- Upper Bandwidth (-3dB) = 13GHz
- Operates at OC-192 / STM-64 up to 11.3Gbps NRZ rates
- 针对 PIN 型光电二极管进行优化
- Can be used with APD (0.4pF) at 10Gbps
- RSSI（接收信号强度指示）
- Operating junction temperature range = -40 to +125°C
- SONET/SDH-based transmission systems, test equipment and modules
- OC-192 fibre optic modules and line termination
- 10 Gigabit Ethernet
- 光纤通道
- Serial data systems up to 11.3Gbps
应用
封装
- 裸芯片
订购代码
- GN1052-CHIP
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
| Part # | 国家/地区 | Qty | Buy | 经销商 |
|---|
Search Pb(Lead)-Free/RoHS-Green Search
（-40°C 至 +85°C / 4000 循环）
（50°C，4000 小时）
mySemtech
探索丰富的可下载资源和数据表，帮助原型制作和生产。
正在查找文档？
Login or register for mySemtech to gain access to restricted product documentation and to add documents to your Watch List for update alerts
资源
To see more videos Videos
Optical solutions are essential to connect and power the digital era as signal integrity forms the backbone of every digital platform. Every time someone opens a webpage or uses a connected device, data moves from point A to B—often using optical fiber. With increasing industry and consumer demand for high-quality internet and fast upload and download speeds, fiber now makes up 32% of fixed-broadband subscriptions, up 20% in the last decade. The data center and enterprise networking companies powering data usage and cloud computing need high performance optical interconnect technology to minimize cost and power consumption without sacrificing efficiency and speed.
Tri-Edge: Next-Gen Data Center and Wireless…
立即阅读
Semtech’s Tri-Edge™ GN2255 is the industry’s first analog IC solution enabling ultra-low latency, less than 1.5W module power, and performance for up to 10km reach for 50Gbps PAM4 SFP56 optical modules. Based on the proven Tri-Edge CDR platform qualified in data center applications, the new solution delivers the cost effectiveness, small footprint, low power, ultra-low latency, and performance demanded by 5G front haul applications. The new Tri-Edge GN2255 enables 50Gbps PAM4 links that will double the bandwidth of currently deployed 25Gbps NRZ front haul links. Semtech’s introduction of the Tri-Edge 5G wireless IC will help support new 5G applications, including edge computing, enhanced mobile broadband and device streaming, and fixed wireless access (i.e., home Internet). Learn more about the product announcement here.
今年早些时候，评估工程 (EE) 与 Semtech 信号完整性产品事业部高级营销经理 Raza Khan 进行了交谈，讨论了行业趋势和新 Tri-Edge 5G 无线产品。
立即阅读
Semtech has recently returned from ECOC, one of the optical industry’s most anticipated and widely attended events of the year. The event hosts more than 6,500 scientists, researchers and industry experts from the field of high performance optical communication. Semtech’s booth was once again a hub for interested visitors eager to learn more about Semtech’s leading optical platform, and discuss current trends.
Semtech and Open Eye MSA Redefine Optical…
立即阅读
The dual-density version of the Quad Small Form-factor Pluggable (QFSP) Multi-Source Agreement (MSA) module standard looks set to be the rule for new line-cards, following a raft of demonstrations and alpha module tests in 2018. The hidden message of the QSFP-DD craze is not the physical characteristics of the module itself, but what it says about the turn to advanced signaling methods. Half a decade ago, QSFP28’s arrival heralded the coming dominance of 25Gbps electrical channels using NRZ signaling. Now, QSFP-DD, and its larger cousin, the octal SFP or OSFP, use PAM4 signaling. This most often uses 50Gbps channels, but QSFP-DD is flexible enough to use eight-channel interfaces in a variety of implementations: 25G x 8 for 200Gbit Ethernet, 50G x 8 for 400Gbit Ethernet, and perhaps some early 100G x 8 for a pre-standard 800Gbit Ethernet.
Optics MSA: QSFP-DD Puts PAM4 Signaling in…
立即阅读
Slow but steady advances were made in 2018 in on-board optical links for chip-to-chip and chip-to-module interfaces. The integrated-optics revolution, anticipated three years ago when the Consortium for On-Board Optics (COBO), of which Semtech is an associate member, was launched, has been replaced by a realization that only slow migration from traditional pluggable modules will serve the data center, whether within a single line card or server blade, or between cards and racks. Even as recent as a year ago, COBO members began rethinking and changing their tune to stress coexistence of pluggable MSA modules and the embedded on-board modules chosen by COBO as a de facto standard.
A Revolution in Embedded Optics, or a Partner to…
立即阅读
The 44th installment of the European Conference on Optical Communication (ECOC) Exhibition recently concluded in Rome, Italy. At the conference, Semtech featured several products for the critical hyper-scale data center and 5G wireless markets. The technologies demonstrated by Semtech from its diverse portfolio of Optical solutions include the ClearEdge® CDR platform for low-cost 25G SFP28 modules that will be an essential component of the 5G infrastructure build out. Additionally, Semtech demonstrated its new line of Tri-Edge CDRs and FiberEdge™ linear Physical Media Dependent (PMD) devices that will help drive current Cloud data center build outs.
5G and Data Centers: Signal Integrity Trends
立即阅读