概览

GN2010E 是一款集成双向 CDR、EML 激光驱动器和限幅放大器，适用于 XFP 和 SFP+ SONET、10GBase-ER/ZR 以太网和 8.5Gb/s 光纤通道应用。

它是一种高度集成、低功耗、小尺寸的器件，是小型光学模块的理想选择。

传输路径由可选的输入均衡、多速率 Tx CDR 和 EML 激光驱动器组成。接收路径由具有可编程均衡的限幅放大器、多速率 Rx CDR 和输出去加重组成。传输方向提供高度可配置的眼图成型功能，包括可独立编程的上升和下降预加重，可实现最佳的电和光输出。两个方向都提供极性反转、环回和输出静音选项。

The GN2010E has an integrated analog to digital converter, which through the serial interface, provides digital diagnostic information on supply voltage, die temperature, and transmit optical power. The GN2010E is configurable for multi-rate operation. The GN2010E also offers integrated laser safety features.

The GN2010E device is packaged in a small-outline 5mm × 5mm 32-pin, high-frequency QFN package with exposed pad. The GN2010E is Pb-free, and the encapsulation compound does not contain halogenated flame retardant. This component and all homogeneous sub-components are RoHS compliant.

订购代码

GN2010E-INE332-QFN

PB Free/ROHS

Learn More →

功能

Dual CDR with 8.5Gb/s, 9.95-11.3Gb/s and 10.3-11.7Gb/s reference-free operation
Integrated laser bias and driver for electo-absorption modulators (EAMs) and modulated lasers (EMLs)
Integrated limiting amplifier with sensitivity less than 7mV
Digital control through I2C or SPI interface
Programmable Jitter Transfer bandwidth
Supports Automatic Power Control (APC) loop
Bi-directional loopback
Polarity invert and output available in both transmit and receive direction
Programmable Rx output de-emphasis
Programmable Tx output pre-emphasis
任务模式型眼图监视器
PRBS Generator and Checker
Programmable Limiting Amplifier Equalization
Programmable Transmit Input Equalization
Programmable Input Slice Level Adjust
Programmable LOS with adjustable threshold and hysteresis
Programmable Sampling Phase Adjust
Programmable Tx Fault signalling
Integrated analog to digital converter, which provides access to digital diagnostic information on supply voltage, die temperature, and transmit optical power
Single 3.3V supply (+5%/-10%)
Integrated laser safety features
5x5 32-pin QFN package
-40°C to 95°C case operation
Laser bias current up to 120mA
Option for source or sink bias current
Modulation swing of up to 2.5Vpp single-ended
2x 50? single-ended terminations
Transmitter disable pin
Crossing point adjustment
Independently programmable rise and fall de-emphasis
Jitter Optimization with Phase Adjust feature
Optional on-chip APC loop
Programmable Tx Fault signalling
Programmable peaking control