GS3590
The GS3590 is a low-power, configurable multi-rate re-timing cable equalizer/cable driver supporting rates up to 3G UHD-SDI. It can be configured to equalize or drive signals over 75Ω coaxial cable. It includes DC restoration to compensate for the DC content of SMPTE pathological test patterns. Since the GS3590 is a re-timing device, extremely low output jitter is achievable even at extended cable/trace lengths.
功能
- Single bidirectional 75Ω, cable interface with on-chip termination
- 输入/输出符合 SMPTE ST 424、ST 292-1 和 ST 259 标准
- 从 1 Mb/s 到 2.97 Gb/s 的多标准运行
- 支持 270 Mb/s 的 DVB-ASI 和 125 Mb/s 的 MADI 重定时
- 3D 输入信号眼图监视器
- PRBS 生成器和检验器
- Automatic cable equalization. Typical equalized cable lengths of Belden 1694A cable:
- 160m at 2.97Gb/s
- 速率为 1.485Gb/s 时长度为 240m
- 速率为 270Mb/s 时长度为 400m
- Cable equalizer mode features:
- Automatic power down on loss of signal
- 可编程的载波检测和抑制阀值调节
- Manual and automatic cable equalizer bypass
- Cable driver mode features:
- 广泛的振幅控制
- 预加重以补偿设备输出和 BNC 之间严重的插入损耗
- Manual or automatic power-down of loss of signal
- 信号丢失时手动或自动静音或禁用
- 迹线均衡器功能:
- Integrated 100&Omega, differential input termination
- Manual or Automatic power down on loss of signal
- 可调节载波检测阈值
- 从 1.2 V 到 2.5 V CML 逻辑的直流耦合
- Trace Equalization to compensate for up to 60” FR4 at 2.97Gb/s
- Automatic input offset compensation
- Trace driver features:
- Integrated 100&Omega, differential output termination
- 从 1.2 V 到 2.5 V CML 逻辑的直流耦合
- Trace driver data output pre-emphasis to compensate for up to 60” FR4 at 2.97Gb/s
- 信号丢失时手动或自动静音或禁用
- CDR 功能:
- 手动或自动速率模式
- Manual or Automatic Re-timer Bypass
- Wide-range Loop bandwidth control
- Re-timing at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, 2.97Gb/s. This includes the f/1.001 rates.
- 其他功能:
- Single 1.8V power supply for analog and digital core
- 2.5V for cable driver output supply
- 1.2 V、1.8 V 或 2.5 V 迹线驱动器输出电源
- GSPI 串行控制和监控接口
- 四个可配置的 GPIO 引脚,可用于控制或状态监控
- 工作温度范围宽:-40℃ 至 +85℃
- 小型 6 mm x 4 mm 40 引脚 QFN 封装
- Pb-free/Halogen-free/RoHS & WEEE compliant package
- Pin compatible with GS12090
- SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259 interfaces requiring switching between cable equalizing or cable driving functionality.
应用
Pb(Lead)-Free/RoHS-Green Info
(-40°C 至 +85°C / 4000 循环)
(50°C,4000 小时)
Datasheets & Documentation
探索丰富的可下载资源和数据表,帮助原型制作和生产。
登录或注册 mySemtech,以获得限定的产品文档,并将文档添加到观察清单以获得更新提醒
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
Part # | 国家/地区 | Qty | Buy | 经销商 |
---|
资源
To see more videos Videos
In this fifth and final installment of the BlueRiver applications blog series, we’ll look at how two Semtech products lines – Semtech’s BlueRiver® ASIC platform for Pro AV and SDVoE™, and broadcast Serial Digital Interface (SDI) – can enable a unique set of “SDI-over-IP” products and applications.
立即阅读Whether you are watching an action replay of a baseball game on a giant screen at a stadium, a movie on your large-screen TV or streaming a video on your laptop computer, a high-quality audiovisual (AV) experience is always expected. Ultra-High-Definition Serial Digital Interface (UHD-SDI) and High-Definition Multimedia Interface (HDMI) are two standards for digital AV transmission. UHD-SDI standardizes the transmission of uncompressed and unencrypted digital AV signals over coaxial or fiber optic cables. HDMI is a digital interface for transmitting high-definition, high-speed digital multi-track audio and uncompressed video signals from HDMI-compliant sources to AV displays. Even though they both can transport ultra-high-definition AV signals from a source to a display, HDMI is preferred to connect consumer gadgets such as computers, gaming consoles, Blu-ray/DVD players, televisions, projectors, etc. UHD-SDI is preferred for high-end applications such as professional indoor/outdoor video production and television broadcasts because it supports long-range transmission and a rugged connection with the help of a physical lock mechanism at each end of the cable. UHD-SDI coaxial cable can transfer signals up to 300 feet, whereas HDMI cables struggle with excessive signal degradation even within 50 feet. These two interfaces can be used together via an HDMI-SDI or SDI-HDMI converter. For example, as shown in figure 1, an HDMI display would be used for confidence monitoring of an SDI stream to avoid the need to use specially calibrated SDI-specific displays.
Circuit Protection for HDMI-SDI/SDI-HDMI…
立即阅读