Semtech GS3281

The GS3281 is a low-power, multi-rate, re-timing cable driver supporting rates up to 3G-SDI. It is designed to receive 100Ω differential input signals, automatically recover the embedded clock from the digital video signal and re-time the incoming data, and transmit the re-timed signal over 75Ω coaxial cables. The 100Ω trace input supports up to 17dB of insertion loss.The device supports SMPTE ST 424 (3G SDI), ST 292-1 (HD-SDI) and ST 259 (SD-SDI). In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s, and MADI at 125Mb/s.除了标准SMPTE速率外,该器件也支持在270Mb/s时对DVB-ASI重新定时,在125Mb/s时对MADI重新定时。 The two cable drivers have highly configurable pre-emphasis and swing controls to compensate for long trace and connector losses. Additionally, automatic and user selectable output slew rate control is provided for each cable driver output.
Overview
Features
- 与片上端点连接的双路非反向75Ω电缆
- 符合SMPTE ST424、ST292-1和ST 259标准的输入/输出
- 支持多种标准,速率从1Mb/s到2.97Gb/s
- 除了标准SMPTE速率外,该器件也支持在270Mb/s时对DVB-ASI重新定时,在125Mb/s时对MADI重新定时。
- 电缆驱动器的特征:
- 宽摆幅控制
- 预加重来补偿器件输出和BNC之间重大的插入损失
- 自动/手动输出转换速率控制
- 手动或自动重置定时器旁路
- 信号丢失时,手动或自动静音或禁用
- 跟踪均衡器的特性:
- 集成的100Ω差分输入端点
- 失去信号时自动断电
- 可调的载波检测阈值
- 从1.2V到2.5V的CML逻辑DC耦合
- 在2.97Gb/s时,跟踪均衡可补偿高达60英寸的FR4
- 自动输入偏移补偿
- CDR的特性:
- 手动或自动速率模式
- 宽环路带宽控制
- 在以下数据速率时重新定时:125Mb/s、270Mb/s、1.485Gb/s和2.97Gb/s。其中包括f/1.001速率。
- 附加特性:
- 用于模拟和数字内核的同一个1.8V电源
- 用于电缆驱动器输出的2.5V或3.3V电源
- GSPI串行控制和监控接口
- Four 用于控制或状态监控的4个可配置的GPIO引脚
- 宽工作温度范围:-40度至+85度
- 小占位40引脚6mm*4mm QFN封装
- e无铅/无卤素且符合WEEE标准的封装
- 与GS12181、GS12182和GS12281引脚兼容
Applications
SMPTE ST 424、SMPTE ST 292、SMPTE ST 259和AES10同轴电缆串行数字接口
Packaging
Order Codes
SMPTE ST 424、SMPTE ST 292、SMPTE ST 259和AES10同轴电缆串行数字接口