利用 LoRaWAN® 连接的智能胸牌,全方位保障人员安全
Quick Facts
公司
Minew
Customer Profile
Minew is committed to providing the most actionable insights in the IoT industry, making it accessible to as many individuals and businesses as possible. With a comprehensive range of products integrating advanced technologies such as LoRa, RTLS,and more, Minew is at the forefront of driving innovation and efficiency in the IoT ecosystem.
Objectives
- Seamlessly integrate with existing ID card infrastructure
- Switch intelligently between GNSS, BLE, and Wi-Fi Scan for indoor/outdoor positioning
- Deliver instant multi-sensory emergency alerts
- Minimize power use and prevent data loss in dead zones
Results
- Intelligent GNSS/BLE/Wi-Fi switching for seamless indoor-outdoor positioning
- Local storage for up to 5,000 records; no data loss in dead zones
- Multi-sensory alerts via RGB LED, buzzer, and haptic motor
- 800 mAh battery with adaptive power management
- 22 dBm max transmission power
- Future-ready for centimeter-level positioning via Bluetooth Channel Sounding
- Deployed in healthcare, factories, schools, campuses, and construction sites
Products & Services
Introduction
In hospitals, construction sites, industrial parks, and large campuses, maintaining real-time visibility of personnel is a constant operational challenge. Signal blind spots, complex building layouts, and the burden of carrying multiple devices all increase safety risks and slow emergency response times. Traditional RTLS solutions either require costly infrastructure overhauls or fail to deliver consistent coverage across both indoor and outdoor environments.
Minew addressed this challenge head-on with the MWC05 Safety Location Smart Badge, an ultra-thin, LoRaWAN®-connected wearable that works with existing CR80 ID cards and intelligently combines GNSS, BLE, and Wi-Fi positioning to deliver uninterrupted coverage wherever personnel operate.
Challenge
Personnel safety systems in high-pressure environments face three persistent problems. First, no single wireless technology covers all environments reliably GPS fails indoors, BLE struggles outdoors, and Wi-Fi coverage is uneven across large facilities. Second, badge overload forces workers to carry multiple devices, reducing compliance and increasing the risk of missed alerts. Third, network dead zones in basements, stairwells, and remote outdoor areas create gaps in location tracking, exposing organizations to liability and delayed emergency response.
Facility operators needed a single wearable that could bridge all these gaps, one that integrated into existing ID badge workflows, provided instant and reliable alerts, and retained location data even when connectivity was temporarily lost.
The LR1110 serves as the core component enabling long-range communication and Wi-Fi positioning capabilities, while also supporting GNSS positioning. The combination of long range communication, low power consumption, and multiple positioning technologies was key to our selection. By integrating LoRa communication, GNSS scanning, and Wi-Fi scanning into a single chip, the LR1110 reduces the number of external components and lowers overall system complexity
解决方案
The MWC05 Safety Location Smart Badge uses GNSS, BLE, and Wi-Fi for precise multi-environment positioning, while relying on the LoRaWAN® Stellar Gateway as the long-range, low-power communication backbone that connects every badge to the centralized management platform.
This architecture is deliberate. BLE and Wi-Fi handle granular indoor positioning where infrastructure is available, while GNSS takes over in open outdoor environments. LoRaWAN® then aggregates all sensor data, location updates, and emergency alerts from across the facility and transmits them reliably to the management platform even in areas where Wi-Fi signals are weak, cellular coverage is patchy, or deploying additional access points would be impractical. A single LoRaWAN® gateway covers an entire facility, dramatically reducing infrastructure costs compared to dense Wi-Fi deployments.
Built on the nRF54L15 chipset with hardware support for Bluetooth Channel Sounding, the MWC05 is future-ready for centimeter-level distance awareness. Its adaptive power management using periodic and movement-based reporting modes is further optimized by LoRaWAN®’s low-power network design, extending battery life across full work shifts on a single 800 mAh rechargeable battery.
A thin CR80 card holder allows staff to insert their existing work ID directly, eliminating additional devices. Dual buttons handle SOS and routine task requests, while a 7-color RGB LED, buzzer, and haptic motor deliver immediate multisensory feedback. The RGB LED also signals proximity risks and unauthorized entry through seven distinct color codes with all alerts transmitted over LoRaWAN® to operations teams in real time.
In network dead zones, the MWC05’s onboard storage retains up to 5,000 trajectory records, which sync automatically once LoRaWAN® connectivity is restored and can be exported via the MinewLink App for audit-ready compliance documentation.
Deployment details:
- MWC05 has been deployed globally, including regions such as the United States and Brazil, with a deployment scale exceeding 10,000 units. The solution is primarily focused on personnel safety, including applications in smart office environments and related scenarios.
福利
The product is available in two versions with vertical and horizontal hanging holes to meet different wearing habits. The whole device has an lP65 protection grade, allowing staff to use their existing work badge without carrying additional devices. This frictionless approach drives higher compliance and reduces resistance to adoption.
- Seamless Indoor-to-Outdoor Location Coverage
Intelligent switching between GNSS, BLE, and Wi-Fi ensures accurate positioning in any environment from signal-dense hospital corridors to open construction sites with LoRaWAN® gateway infrastructure providing reliable backhaul connectivity across the entire facility. - Instant Multi-Sensory Emergency Alerting
Dual SOS and programmable buttons, a 7-color RGB LED, buzzer, and haptic motor deliver immediate, unmistakable alerts to both the wearer and operations teams reducing emergency response times and supporting site-wide evacuation commands. - Zero Data Loss in Network Dead Zones
Local storage of up to 5,000 trajectory records ensures complete location history is retained even when connectivity is temporarily unavailable. Data is exportable via MinewLink for compliance, audit, and incident investigation purposes. - Future-Ready Positioning Intelligence
Hardware support for Bluetooth Channel Sounding enables future upgrades to centimeter-level distance awareness and enhanced hybrid positioning protecting the technology investment as facility requirements evolve. - Versatile Deployment Across Sectors
Designed for healthcare facilities, office buildings, factories, industrial parks, schools, campuses, and construction sites, the MWC05 addresses personnel safety challenges across the broadest range of operational environments.