GN2010D
The GN2010D is an integrated bi-directional CDR, DFB/FP laser driver and limiting amplifier for XFP & SFP+ SONET, 10GBase-LR Ethernet and 8.5Gb/s Fibre Channel applications.
它是一种高度集成、低功耗、小尺寸的器件,是小型光学模块的理想选择。
传输路径由可选的输入均衡、多速率 Tx CDR 和 DFB 激光驱动器组成。接收路径由具有可编程均衡的限幅放大器、多速率 Rx CDR 和输出去加重组成。发射和接收方向都提供高度可配置的眼图成型功能,可实现最佳的电和光输出。两个方向还提供极性反转、环回、输出静音和可编程输出均衡选项。
The GN2010D has an integrated analog to digital converter, which through the serial interface, provides digital diagnostic information on supply voltage, die temperature, laser bias current, and transmit optical power. The GN2010D is configurable for multi-rate operation. The GN2010D also offers integrated laser safety features.
The GN2010D device is packaged in a small-outline 5mm × 5mm 32-pin, high-frequency QFN package with exposed pad. The GN2010D is Pb-free, and the encapsulation compound does not contain halogenated flame retardant. This component and all homogeneous sub-components are RoHS compliant.
功能
- Dual CDR with 8.5Gb/s, 9.95-11.3Gb/s and 10.3-11.7Gb/s reference-free operation
- Integrated DFB/FP laser driver
- Integrated limiting amplifier with sensitivity less than 7mV
- Digital control through I2C or SPI interface
- Programmable Jitter Transfer bandwidth
- On-chip Automatic Power Control (APC) loop
- Bi-directional loopback
- Polarity invert and output available in both transmit and receive direction
- 可编程输出去加重
- 任务模式型眼图监视器
- PRBS Generator and Checker
- Programmable Limiting Amplifier Equalization
- Programmable Transmit Input Equalization
- Programmable Input Slice Level Adjust
- Programmable LOS with adjustable threshold and hysteresis
- Programmable Sampling Phase Adjust
- Programmable Tx Fault signalling
- Integrated analog to digital converter, which provides access to digital diagnostic information on supply voltage, die temperature, laser bias current, and transmit optical power
- Single 3.3V supply (+5% / - 15%)
- Integrated laser safety features
- 5x5 32-pin QFN package
- -40°C to 100°C case operation
- Laser bias current up to 120mA
- Option for source or sink bias current
- Modulation current into differentially-driven 25? TOSA up to 80mA peak-to-peak
- 2x 25? single-ended terminations
- Transmitter disable pin
- Crossing point adjustment
- Jitter Optimization with Phase Adjust feature
- Optional on-chip APC loop
- Programmable Tx Fault signalling
- XFP & SFP+ 10Gb/s SONET optical transceivers
- XFP & SFP+ 10GBase-LR optical transceivers
- XFP 和 SFP+ 远距离 8.5 Gb/s 光纤通道收发器
应用
Pb(Lead)-Free/RoHS-Green Info
(-40°C 至 +85°C / 4000 循环)
(50°C,4000 小时)
探索丰富的可下载资源和数据表,帮助原型制作和生产。
登录或注册 mySemtech,以获得限定的产品文档,并将文档添加到观察清单以获得更新提醒
Distributor/Catalog Supplier Inventory
View product availability from participating distributors below. Browse all distributers here.
Part # | 国家/地区 | Qty | Buy | 经销商 |
---|
资源
To see more videos Videos
Semtech’s Tri-Edge™ GN2255 is the industry’s first analog IC solution enabling ultra-low latency, less than 1.5W module power, and performance for up to 10km reach for 50Gbps PAM4 SFP56 optical modules. Based on the proven Tri-Edge CDR platform qualified in data center applications, the new solution delivers the cost effectiveness, small footprint, low power, ultra-low latency, and performance demanded by 5G front haul applications. The new Tri-Edge GN2255 enables 50Gbps PAM4 links that will double the bandwidth of currently deployed 25Gbps NRZ front haul links. Semtech’s introduction of the Tri-Edge 5G wireless IC will help support new 5G applications, including edge computing, enhanced mobile broadband and device streaming, and fixed wireless access (i.e., home Internet). Learn more about the product announcement here.
今年早些时候,评估工程 (EE) 与 Semtech 信号完整性产品事业部高级营销经理 Raza Khan 进行了交谈,讨论了行业趋势和新 Tri-Edge 5G 无线产品。
立即阅读在 2018 年进行了大量演示和 alpha 模块测试之后,双密度版本的四通道小型可插拔 (QFSP) 多源协议 (MSA) 模块标准有望成为新线卡的规则。QSFP-DD 热潮的隐含意义不是模块本身的物理特性,而是转向先进信令方法的趋势。十年前,QSFP28 的问世预示着使用 NRZ 信令的 25Gbps 电通道即将占据主导地位。如今,QSFP-DD 及其更庞大的表亲 —— 八进制 SFP 或 OSFP ,都使用 PAM4 信令。其用得最多的是 50Gbps 通道。但 QSFP-DD 足够灵活,可以在各种实施中使用八通道接口:25G x 8 用于 200Gbit 以太网,50G x 8 用于 400Gbit 以太网,可能还有一些早期的 100G x 8 用于预标准 800Gbit 以太网。
立即阅读Slow but steady advances were made in 2018 in on-board optical links for chip-to-chip and chip-to-module interfaces. The integrated-optics revolution, anticipated three years ago when the Consortium for On-Board Optics (COBO), of which Semtech is an associate member, was launched, has been replaced by a realization that only slow migration from traditional pluggable modules will serve the data center, whether within a single line card or server blade, or between cards and racks. Even as recent as a year ago, COBO members began rethinking and changing their tune to stress coexistence of pluggable MSA modules and the embedded on-board modules chosen by COBO as a de facto standard.
立即阅读